SKU: TF015

Availability: In stock


Product Description


TERRAFIRMA HEAVY LOAD FR/LIGHT LOAD R SPRINGS (PAIR) 90/110/130/D1/RRC TERRAFIRMA COIL SPRINGS The purpose of a vehicle’s suspension is to support the weight of the vehicle and absorb impacts, maximising the tyre’s contact with the ground while maintaining stability and control. When using a Land Rover off-road the limits of the standard suspension are quickly realised when the lack of wheel travel affects traction and ultimately the vehicle’s ability to maintain forward motion. The added benefits of long travel suspension are exponential. Taller suspension allows larger tyres to be fitted as well as allowing greater suspension movement. Raising the suspension will also increase approach, departure and ramp over angles allowing your Land Rover to overcome larger obstacles. Terrafirma Coil Springs are designed to lift the vehicle by approximately 2” (50mm).This is the optimum increase in ride height before the mechanical limitations of the suspension design become an issue requiring further modifications. Safety has to be a consideration, raising the centre of gravity too high increases the risk of a roll over. A vehicle lifted by 2” (50mm) using correctly matched Terrafirma Coil Springs and shocks will also improve on road handling, comfort and stability from the original set up. Terrafirma Coil Springs are made from the highest quality steel, formed on accurate computer controlled mandrels and precisely heat treated to ensure consistent manufacture. All springs are shot peened to relieve stress and scragged to ensure long spring life and prevent sag, finally powder coated silver for long lasting good looks. Correct Coil Spring Selection It is important to understand that all Terrafirma Coil Springs have been designed to provide approximately 2” (50mm) of lift while carrying light, medium or heavy loads. Minimal mechanical changes are required when lifting by this amount, however the Terrafirma Hardware range of accessories does allow for greater lift and significantly increased wheel travel, further enhancing off-road ability. Selecting the most suitable springs for a Land Rover may be with some compromise. A heavy load spring needed when fully loaded may ride too high and too hard when unloaded. Likewise a light load spring that is comfortable and flexible will not achieve the desired lift or carry the heavy loads associated with expedition vehicles. Load carrying coil springs are often progressive or variable (V) this provides a combination of comfort and load carrying in one spring. It is worth noting that Terrafirma coil springs are sold in pairs, in many cases one spring is 10mm longer than the other, the longer spring should always be fitted to the driver’s side. By considering the three Defender images and combining the Terrafirma Coil Spring application guide and specifications it should be possible to select suitable coil springs or a suspension kit for your vehicle. Use the detailed spring descriptions by part number to help accurately fine tune the spring requirements for your specific application. DEF/D1/RRC Heavy load front springs TF015 Heavy load front coil springs are designed to provide 2" of lift on vehicles with around 100kg of additional equipment. Such as a heavy-duty winch bumper, winch and other equipment fitted to the front of a Discovery 1, Range Rover Classic and all Defenders. For example use TF015 springs on Defenders fitted with a Superwinch Husky winch, bumper and bull bar. More than 2" of lift will be achieved when less than 100kg of additional equipment is fitted. Little or no additional equipment may lead to too much lift causing drive shaft vibration and steering geometry problems.

Additional Information

Additional Information

Length N/A
Width N/A
Manufacturer Terrafirma


Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Tags

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.